Quick Links to Our Products
Chain Installation Instructions
When you receive your sign, it will have one chain (approximately 6 foot long) and two mounting screws. This provides you the option to use as much chain as you will need for your personal installation. Here are some basic steps needed to install your chain and hang your sign. You will need a pair of needle nose pliers, a screw driver, and wire cutters for this project. Cut the chain in half as you will need two pieces of approximately the same length. Essentially, you will be opening and closing the end links of the chain to make the connections
Step 1 - Cut the chain in half with wire cutters.
Step 2 - With a pair of needle nose pliers, open the first links on all four ends of the two chains.
Step 3 - Run the chain thru the eye-hook which is already connected to your sign.
Step 4 - After running the chain thru the eye-hook (which is is already connected to the sign), put the open link of the chain thru one of the closed chain links and close the open link making a secure connection. After the connection is made, it will look like the second photo under this step
Step 5 - Repeat Steps 3 and 4 on the other piece of chain
Step 6 - Insert the mounting screws into material (like a wood frame) that will support the weight of the sign. Connect the open ended link of the chain to the mounted screws (second photo under this step). Make sure the screws are mounted into something solid so that they do not pull loose under the weight of the sign.
To place your order, click the “Add to Cart” button below each product. Enter your address and credit card number to complete your order with our secure automated checkout. If you have trouble placing your order with our shopping cart, you can place your order by phone (330) 858-3711.
Copyright © 2004 - 2013 Neon Sign World Ltd.